服务热线: 13823761625

产品中心

联系我们

当前位置:网站首页 >> 产品中心 >> MCU控制器 >> 语音芯片

语音芯片

APT540

    APT540是一款40秒易用语音集成电路。它支持PWM或DAC语音输出,具有高质量的语音,在6 KHz采样和4位硬件压缩下有40秒的语音长度。
    其内部内置一个振荡器,用于系统时钟,无需外部电阻器。最多63个语音组。一组包含几个步骤(语音部分);所有组最多700步。每个步骤可定义触发模式、输出状态、语音部分、静音长度、I/O类型和简单编程功能。

    用户可以选择8位/5位/4位数据压缩。支持三模式触发IC(独立、串行触发模式、CPU命令模式)。易于使用的开发系统用于功能选择和语音组合。PC通过USB端口下载ROM代码。
    APT540is Description:
        APT540is a 40 Sec Easy Use Speech IC .It Support PWM or DAC voice output with high quality speech , There are 40 second Voice Length under 6 KHz sampling and 4 bit hardware compression.
        Its internal built-in a oscillator for system clock without an external resistor. Maximum 63 voice groups. One Group contain several steps(voice section ); Maximum 700 steps for all the Groups. Each Step can be define Trigger Mode, Output Status, Voice Section, Mute length, I/O Type & Simple Programming Function.
        User can select 8bit / 5bit / 4bit data compression. Support three mode trigger IC (Stand Alone, Serial Trigger Mode, CPU Command Mode ). Easy use development system is for function selection and voice combination . PC download the ROM code by the USB Port .

    APT540is Functions
    MAX voice file : 700
    MAX Trigger Groups : 63
    Power On Trigger Group :1 
    MAX Step : 700 
    Signal step mute length : 0.64 s ( 6k sample rate )
    Operating Voltage range: 2.4V ~ 4.5V
    Total Voice Duration : 40” (120K Samples)
    I/O pin : 8
    Voice output : PWM or DAC
    Sequential Key : TG1 -> 32 Groups.
                                   TG2 -> 29 Groups.
                                   TG3~TG8-> 1 Group 
    Debounce time : 50 us or 10 ms
    On/Off function : only for all TG PIN
    Sequential Key for Volume control function.
    Step can change Trigger I/O Type, Trigger Mode & Output Status.
    Hardware Trigger Group Repeat function.
    Simple Programming Function :
    (a) Write data to working register.
    (b) Working Register Increasing.
    (c) Step Jump by Working Register / Volume Status.

    Three Mode Trigger IC :
    - Key Stand-alone Trigger Mode :
        A. Edge/Level 
        B. Hold/Unhold
        C. Retrigger/Irretrigger
    - Serial Trigger Mode :
        Combinations of TG1 and TG2 to trigger maximum 63 Voice Group.
    - CPU Command Mode :
        User command through TG1,TG2,TG3 with SPI CPU Interface to control the Multi-Playback function.

    Output status (for each Output pin): 
        A. Stand by Status. (High/Low Status)
        B. Busy Low Active.
        C. Busy High Active.
        D. LED Flash at 6 Hz.
        E. LED Flash at 3 Hz.
        F. LED Flash at 1.5 Hz.
        G. LED Flash at 0.75 Hz.
        H. PWM for LED Dimming Control.

    Play rate level : 
        APT540 can provide different play rate in one code as follow below Reference Sample Rate.
        3K, 3.2K, 3.31K, 3.42K, 3.55K, 3.69K, 3.84K, 4K, 4.17K, 4.36K, 4.57K,
        4.8K, 5.05K, 5.33K, 5.64K, 6K, 6.4K, 6.85K, 7.38K, 8K, 8.72K, 9.6K, 
        10.66K, 12K, 13.71K, 16K, 19.2K, 24K.

    TG2 Low Reset

    TG3 Volume Control

    APT540 Pad Location:


    APT540 PIN Descriptions:


    APT540 TG2 Low Reset:


    APT540 Application Circuit:
    APT540 3V Stand-alone Mode


    APT540 3V Serial Mode


    APT540 5V Serial Mode


    APT540 3V CPU Mode


    APT540 5V CPU Mode


    APT540 Package Information:

    Writer Board Slot Location (DIP20):

    请提交您的基本信息,发邮件Sales@ChipSourceTek.com,或者打电话给我们,13823761625(微信同号),我们将会尽快与您联系!

    *

    *

    *

    *

相关产品