Service Hotline: 13823761625

Products

Contact Us

You are here:Home >> Products >> MCU >> Voice chip

Voice chip

TRSM5085A

    TRSM5085A series are 4-bits micro-controller which could play 4 channel melody or 4 channel ADPCM with PWM direct drive circuit. PWM resolution is 8/10/12 bits. They include a low cost, high performance CMOS micro-processor. The clock frequency of this up is typically 8.192 (±3%) MHz. This chip operates over a wide voltage range of 2.0V~5.5V. It contains program ROM (PROM) and data ROM (DROM) inside. 
    The maximum program ROM is 8K words and maximum data ROM size is 255K byte. The maximum working SRAM is (256+2) nibbles. It is provided with total 16 software programmable I/O Ports.
    TRSM5085A General Descriptions:
        TRSM5085A series are 4-bits micro-controller which could play 4 channel melody or 4 channel ADPCM with PWM direct drive circuit. PWM resolution is 8/10/12 bits. They include a low cost, high performance CMOS micro-processor. The clock frequency of this up is typically 8.192 (±3%) MHz. This chip operates over a wide voltage range of 2.0V~5.5V. It contains program ROM (PROM) and data ROM (DROM) inside. 
        The maximum program ROM is 8K words and maximum data ROM size is 255K byte. The maximum working SRAM is (256+2) nibbles. It is provided with total 16 software programmable I/O Ports.

    TRSM5085A Features:
    Operating voltage: 2.0V to 5.5V
    MCU Operation frequency: 8.192MHz 
    Memory Size 
      -Program ROM size: 8K*12-bits MASK type
      -Data ROM size: 255K*8-bits MASK type
      -SRAM size: 256*4 bits
      -User register: 2*4 bits
    Wakeup function for power-down mode: 
      -HALT mode wakeup source: Port A, Port B, Port D and Port E/CE can wake-up from HALT mode to NORMAL mode and executing wake-up sub-routine program. 
      -RTC wakeup: Clock source comes from internal LRCOSC, time period 1/16/64/128 ms. 
        RTC wakeup function only support in TRSP(M)5165S1. 
    12 input/output pins: Port A, Port B and Port D can be defined as input or output port bit by bit. 
    4 input/output ports or 4 input only ports or 4 output only ports “Port CE/E/C” defined by option: 
      -If input only ports are employed, Port E defined as input only ports. 
      -If output only ports are employed, Port C defined as output only ports. 
      -If input/output ports are selected, Port CE defined as input/output ports bit by bit. 
    Four reset condition: 
      -Low voltage reset. (LVR = 2.0V) 
      -Power on reset. 
      -External reset pin. (active low) 
      -Watch dog timer overflow. 
    One internal interrupt sources: 
      -PWM interrupt. 
    WDT 
      -Watch dog timer, can enabled/disabled by option. 
      -WDT period is 256*256*16/Fsys. (WDT period is 0.13 sec for system clock=8.192MHz) 
    Audio output: 
      -Support PWM or DAC mode by option. 
      -Support 8/10/12 bits. 
    Support option set for pull down resistor 1M, 50K or 220K Ohm, reset pin (PB3 or PC3), low voltage reset…etc. 
    Oscillator fuse option ±3%, temperature & voltage compensation. 
    Support security option (1 bit) for read inhibition. 
    Support 16-levels LVD function.

    TRSM5085A provides SOP8, SOP16, SSOP24 package

    TRSM5085ABlock Diagram

    TRSM5085A Port PCE mode block diagram



    TRSM5085A The Application Circuit

    DAC Selected by option

    Motor application
    Please submit your basic information and send an email Sales@ChipSourceTek.com , or call us at 13823761625 (the same number as wechat), and we will contact you as soon as possible!

    *

    *

    *

    *

Related products