服务热线: 13823761625

产品中心

联系我们

当前位置:网站首页 >> 产品中心 >> 充电管理类

充电管理类

ME4056

    ME4056 is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. 
    No external sense resistor is needed and no blocking diode is required due to the internal PMOSFET architecture .
    When the input supply (wall adapter or USB supply) is removed the ME4056 automatically enters a low current state dropping the battery drain current to less than 2μA.The ME4056 can be put into shutdown mode reducing the supply current to 55μA.
    Other features include Battery temperature monitor, under-voltage lockout, automatic recharge and two status pins to indicate charge and charge termination.
    ME4056 General Description
        ME4056 is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. With a thermally enhanced 8-PIN SOP package on the bottom and low external component count make the ME4056 ideally suited for portable applications. Furthermore the ME4056 is specifically designed to work within USB power specifications.
        No external sense resistor is needed and no blocking diode is required due to the internal PMOSFET architecture .Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature .The charge voltage is fixed at 4.2V (ME4056A is 4.34V),and the charge current can be programmed externally with a single resistor. The ME4056 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.
        When the input supply (wall adapter or USB supply) is removed the ME4056 automatically enters a low current state dropping the battery drain current to less than 2μA.The ME4056 can be put into shutdown mode reducing the supply current to 55μA.
        Other features include Battery temperature monitor, under-voltage lockout, automatic recharge and two status pins to indicate charge and charge termination.

    ME4056 Features
    Protection of battery cell reverse connection
    Programmable charge current up to 1A
    No MOSFET sense resistor or blocking diode required
    Complete linear Charger in SOP8 Package for single Cell Lithium-Ion Batteries.
    Constant-Current/Constant-Voltage operation with thermal regulation to maximize Rate Without risk of overheating.
    Preset 4.2V (ME4056A is 4.34V) charge voltage with ±1% accuracy
    Automatic Recharge
    Two Status Indication for Charge status, no battery and battery failure indicators
    C/10 charge termination
    55μA supply current in shutdown
    2.9V trickle current charge threshold
    Soft-Start limits inrush current
    Battery Temperature Sensing

    ME4056 Applications
    Cellular Telephones
    Digital Still Cameras
    MP3 Players
    Bluetooth Applications
    Portable Devices
    USB Bus-Powered Chargers

    ME4056 Pin Configuration

    ME4056 Pin Assignment

    ME4056 Block Diagram

    ME4056 Typical Application



    请提交您的基本信息,发邮件Sales@ChipSourceTek.com,或者打电话给我们,13823761625(微信同号),我们将会尽快与您联系!

    *

    *

    *

    *

相关产品