Service Hotline: 13823761625

Support

Contact Us

You are here:Home >> Support >> Technology

Technology

A4933KJPTR,Automotive grade three-phase MOSFET driver

Time:2024-02-05 Views:318
A4933KJPTR is a three-phase controller designed specifically for automotive applications that can be used with N-channel external power MOSFETs.
    The unique charge pump regulator provides a complete (>10V) gate driver to cope with battery voltage drops as low as 7V and allows A4933 to operate when the gate driver voltage drops to 5.5V.
    Bootstrap capacitors are used to provide the battery power supply voltage required for N-channel MOSFETs. The high-end drive internal charge pump allows direct current (100% duty cycle) operation.
    This device can achieve comprehensive control of all six power FETs in the three-phase bridge, thereby driving the motor through block rectification or sinusoidal excitation. The integration of cross control and adjustable resistance without induction time can prevent power FET from breakdown.
    The bridge current can be measured using an integrated current sensing amplifier. This is an unconstrained differential amplifier with underground common mode range, which can be used in low-end current sensing applications. The gain and offset are defined by external resistance.
    Integrated diagnosis provides indication of undervoltage, over temperature, and power bridge faults. They can be configured to protect power FETs in most short circuit situations. Detailed diagnosis can be provided in the form of serial data words.
    A4933 is packaged in a 48 pin LQFP package with exposed insulation (suffix JP). This is a land area (81mm) ²) Smaller power packaging. Their packaging is all lead-free products, and the pin frames are 100% tin plated.


Features and advantages:
    High current 3-phase gate driver suitable for N-channel MOSFETs
    Compatible with Allegro ® Pin of A4935KJP
    Cross conduction protection through adjustable insensitivity time
    After the charge pump is fully charged, it provides 100% PWM
    Charge pump for low power supply voltage operation
    Unrestricted current sensing amplifier
    5.5 to 50 V power supply voltage range
    Compatible with 3.3 V and 5 V logic circuits
    Comprehensive diagnostic output
    Low current sleep mode











   
      
      
   
   


    Disclaimer: This article is transferred from other platforms and does not represent the views and positions of this site. If there is any infringement or objection, please contact us to delete it. thank you!
    矽源特科技ChipSourceTek