Service Hotline: 13823761625

Support

Contact Us

You are here:Home >> Support >> Technology

Technology

Texas Instruments boost converter and audio amplifier, power lever speaker with long endurance

Time:2023-01-12 Views:1411
describe
Other Parts Discussed in Post: LM5155, TAS5825P
By Eileen Zhang
    The trolley speaker is usually a wireless speaker with a trolley and wheels, as shown in Figure 1. Because it is convenient to drag, easy to move, and can provide enough loudness outdoors, pull rod speakers are widely used in various outdoor activities, such as square dancing, concerts, weddings, meetings, yoga exercises, etc. The main consumer market of pull rod speakers is in China, and also exported to Southeast Asia, Europe and the United States.
    Trolley speakers have a variety of power levels, ranging from tens of watts to hundreds of watts. The factors that affect the power level of the pull rod speaker include the volume and the power of the subwoofer. For example, a 20W trolley speaker usually has a 5-inch woofer; A 100W trolley speaker usually has an 18-inch woofer. Figure 2 shows a middle and high-end lever speaker with screen.
Figure 1. Trolley speaker (basic model) Figure                   2 Trolley speaker (with screen)
    In order to meet the requirements of portability and provide sufficient power at the same time, pull rod speakers are usually equipped with 12V lead-acid batteries. For the trolley speakers above 30W, the 12V battery is not enough to provide sufficient power for the subsequent audio power amplifier, and the boost circuit is required to boost the battery voltage to 15V~48V to meet different power requirements. Figure 3 shows the schematic diagram of the power supply system of a typical trolley speaker.
Figure 3. Schematic diagram of power supply system of pull rod speaker
Application of Booster Controller LM5155 in Trolley Speaker
LM5155 is a new generation of boost controller of Texas Instruments, which has the following advantages in the application of pull rod speakers:
    Support 3.5-V to 45-V wide range input, applicable to different types of batteries
    Built-in 1.5A gate drive circuit can drive high-current MOSFETs, which is suitable for the design of high-power speakers. Compared with other boost schemes on the market, LM5155 can significantly improve efficiency and reduce power consumption, thus extending the battery life of pull rod speakers.
    The overall scheme is small in size, simple in design and low in BOM cost:
    The chip adopts small size WSON package, only 3mm × 2mm, as shown in Figure 4.
    Support high switching frequency (100 kHz to 2.2 MHz), which can effectively reduce the size of external inductance and capacitance and reduce costs.
    The working frequency is programmable, and the external clock synchronization is provided, so the EMI design is more flexible
     It supports programmable undervoltage protection (UVLO) and soft start, and has perfect overvoltage, overcurrent and thermal protection, providing multiple protection for the whole system.
Figure 5 is a typical application circuit diagram of LM5155.
Figure 4. LM5155 packaging schematic diagram               5 LM5155 boost application circuit diagram
Application of Texas Instruments Audio Power Amplifier in Trolley Speakers
    Based on the latest semiconductor manufacturing technology and rich experience in audio power amplifier design, Texas Instruments has launched a series of Class D power amplifier products with excellent performance, high cost performance, and multiple product options, which can meet the needs of different power grade pull rod speakers.

Power level

50- 100W

200- 600W

 

Analog input Class D power amplifier

TPA3128

TPA3126

TPA3220

TPA3221

TPA3251

TPA 3255

Digital input Class D power amplifier

TAS5825P

TAS3251

 

     The power supply voltage (PVDD) of Class D power amplifier is usually provided by boost DC/DC converter in the application of pull rod speaker. Compared with fixed PVDD, variable PVDD adjusted based on the size of audio signal can significantly improve system efficiency, reduce loss, reduce heat, and extend battery life.
    TAS5825P is a digital input class D power amplifier chip newly launched by Texas Instruments in 2019. The chip has a powerful audio DSP core built in and implements a proprietary algorithm called Hybrid Pro. Hybrid-Pro algorithm can detect the upcoming audio power demand, and provide PWM control signal for DC/DC converter through the feedback pin (HPFB) to adjust the output voltage (i.e. the power supply voltage PVDD of Class D power amplifier). TAS5825P supports a delay buffer of up to 4ms to view the audio signal in advance and prevent audio clipping distortion.
    Figure 6 shows the system block diagram of TAS5825PEVM, an audio power amplifier solution with dynamic voltage regulation realized by LM5155 and TAS5825P. As shown in the figure, the audio signal is processed by the Hybrid-Pro algorithm and fed back to the feedback (FB) end of the boost controller LM5155, so as to realize the envelope detection of the audio signal and control the output voltage of LM5155. The built-in delay buffer of TAS5825P can delay the input of music signals to the power amplifier, thus avoiding the distortion of audio output. As can be seen from the experimental waveform in Figure 7, the power supply voltage PVDD will be adjusted according to the envelope amplitude of the audio input signal and ensure that the audio output is distortion-free.
Figure 6. System block diagram of TAS5825P realizing dynamic voltage regulation audio power amplifier
Figure 7. Experimental waveform of TAS5825P realizing dynamic voltage regulation audio power amplifier
    According to the experimental test, 7500mAh single lithium battery supplies 2 × 20W power amplifier is used for power supply. If Class D power amplifier without dynamic voltage regulation is used, the battery life is 2 hours; If the power amplifier is TAS5825P with Hybrid-Pro algorithm, the battery life can be extended to 6 hours, and the battery life is 3 times of the original. For high-power pull rod speakers, the dynamic range of music changes more, and the effect of power saving is particularly significant.
    On the official website of Texas Instruments, you can find more solutions for boost power supply and audio power amplifier that are applicable to the application of pull rod speakers.













   
      
      
   
   


    Disclaimer: This article is transferred from other platforms and does not represent the views and positions of this site. If there is any infringement or objection, please contact us to delete it. thank you!